Cobalt Digital Inc Cobalt NASRaQ Instrukcja Użytkownika Pobierz pdf (Strona 148)

Appendix A

134

Changing network conﬁguration

To reset the IP address or change the network conﬁguration of the

Network 1 interface:

1. On the LCD console, hold down the button for approximately

2 seconds.

The LCD screen displays:

SELECT:

SETUP NETWORK

2. Press the button.

3. Enter the IP address using the arrow buttons. The left and right

arrow buttons move the cursor position to the left or right. The up

and down arrow buttons increase or decrease the digit at the cursor

position.

4. Press the button.

5. Enter the Netmask using the arrow buttons.

6. Press the button.

7. Enter the Gateway using the arrow buttons.

8. Press the button.

9. Use the arrow buttons to toggle the cursor between [S]ave and

[C]ancel.

10. Press the button.

If you select the Save option, the RaQ 3 reboots using the new network

conﬁguration. If you select Cancel, you return to step 1 of this

procedure.

You can also change the network conﬁguration of the RaQ 3 through the

Web browser:

1. On to the Server Management screen, click Control Panel.

2. Click Network at the top of the screen. You can edit the network

settings in the table that appears.

3. When ﬁnished, click Save Changes.

If you change the network IP address of the RaQ 3 through the Web

browser, the RaQ 3 reboots automatically when you click Save

Changes.

1 2 ... 143 144 145 146 147 148 149 150 151 152 153 ... 207 208

Brak uwag

Cobalt Digital Inc Cobalt NASRaQ Instrukcja Użytkownika Strona 148